background image

ONE (1) YEAR LIMITED WARRANTY

FANTOM

 warrants this product to be free from defects in material and workmanship for a period of one (1)

year  from the  date  of  the  original  purchase,  when  utilized for  normal  household use,  subject  to  the  following  conditions,
exclusions and exceptions.

If your  appliance  fails to operate  properly  while in use  under  norma l household  conditions within  the warranty period,  return
the complete appliance and accessories, freight prepaid to

In US: 

FANTOM

, 178 West Service Rd., Champlain, N.Y. 12919

If the  appliance is found  by 

FANTOM

to be  defective in material  or workmanship, 

FANTOM

will  repair  or replace  it  free of

charge. Proof of purchase date and $19.95 to cover the cost of return shipping and handling must be included. *

Non-durable  parts  including,  without limitation,  dust cup  filters,   filters, belts, brushes  and electrical  parts  which  normally  
require  replacement are specifically excluded from warranty.

The liability of 

FANTOM

warranty  does  not  cover  normal  wear  of  parts  and  does  not  apply  to  any  unit  that has  been  tampered  with  or  used  for
commercial purposes. This limited warranty does not cover damage  caused by misuse, abuse, negligent handling  or damage
due to  faulty packaging  or  mishandling in  transit.    This  warranty does  not cover  damage  or defects  caused by or  resulting
from damages from shipping or repairs, service or alterations to the product or any of its parts, which have been performed by
a repair person not authorized by

FANTOM.

This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The
responsibility of 

FANTOM

 if  any,  is limited to the  specific  obligations  expressly assumed by it  under  the terms of

the  limited  warranty.   

In no  event  

is 

FANTOM

 liable  for  incidental  or  consequential damages  of  any  nature

whatsoever. Some states do  not permit the exclusion  or limitation of  incidental or consequential damages,  so the above  may
not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of  purchase  date  and  to  attach
tag  to  item  before  packing  with   your  name,  c

  omplete  address  and   phone  number  with  a  note  giving  purchase

information, model  number  and  what you  believe  is  the problem  with  item. We recommend  you  insure the  package
(as  damage   in   shipping  is  not   covered  by  your   warranty).  Mark  the   outside   of  your   package     ATTENTION

,,

CUSTOMER SERVICE .

OWNERSHIP REGISTRATION CARD

Please fill out and mail the product registration card within ten (10) days of purchase in order to validate the foregoing Limited
Warranty. The registration will enable us to contact you in the unlikely event of a product safety notification. By returning this
card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying
instructions.

RETURN TO

 FANTOM

 , 178 WEST SERVICE RD., CHAMPLAIN, N.Y. 12919

Appliance model

Date purchased

 Name of store

,

Owner  s name

Address 

City 

State 

Zip Code

Printed in China

Model FM741

,,

is limited  solely to  the  cost of  the  repair or  replacement of  the  unit  at  our  option. This 

Summary of Contents for FM741



















Reviews: