background image

OPERATING INSTRUCTIONS

4

3. To use the flexible hose with 

the dusting brush, hold the 
hose in one hand and with the 
other, pull out the dusting brush 
and turn clockwise to lock in 
place. (fig. 4)

Warning:

Always unplug from 

electrical outlet before opening the dust 

cup (container).

Note

: HEPA dust cup filter must be 

used when operating the hand vacuum.

Using The Unit As A Hand 
Vacuum

1. Insert the dusting brush/hose 

connector into the brush chamber 

exhaust port. Lock the flexible hose in 

place by clipping the hose into the 

hose holder. (fig. 1)

Cleaning With the Hose

CAUTION:

The Hand Vacuum is 

a very powerful unit.  Make sure 

that you hold it firmly, otherwise it 

can slip out of your hand and 

cause injury.

To use the hand vacuum with only the 

hose and the dusting brush or crevice 

tool:
1. Rotate the brush cover by pushing on 

the  brush cover release button until it 

clicks in place.  (fig. 2)

2. Remove the flexible hose from the 

brush chamber exhaust port and take 

the hose out from the hose holder. 

(fig. 3)

Fig. 1

Fig. 2

Fig. 3

Fig. 4

3. To use the flexible hose with 

the crevice tool, make sure that 
the brush is in the storage 
position and insert the crevice 
tool into the opening of the 
hose.  (fig. 5)

Fig. 5

OPERATING INSTRUCTIONS

Cleaning & Changing the 
HEPA Dust Cup Filter

Warning:

Always unplug the unit from 

electrical outlet before opening the Dust 

Cup (container).

Important:

Do 

NOT

use the HEPA filter 

cartridge without the debris screen in 

place.

Warning

:

After each Use - Always 

remove the Filter Debris Screen from the 

HEPA  Dust Cup Filter, then vigorously 

TapClean

” HEPA Filter until no more 

dust can be removed.

2. To open the Dust Cup (container), 

push button and remove the Dust 

Cup (container ). (Fig. 7) 

Dust cup release button

Fig.7

3. Rotate the lower dust cup clockwise 

to separate it from the filter chamber. 

Empty and clean the dust cup. (fig. 8)

IMPORTANT, Please Note : 

The 

“TapClean” HEPA Dust Cup Filter & 

Debris Screen will stop most of the tiniest 

dust particles and airborne allergens from 

re-entering the air you breathe. In fact it 

stops 99.97% of all particles as small as 

0.3 microns - many times smaller than a 

human hair!!! Because of this incredible 

filtration performance, the HEPA Dust Cup 

Filter will quickly accumulate, inside the 

white filter folds, many fine dust particles 

that are difficult to see but which will 

eventually block or reduce your suction 

power - if not cleaned properly. Clean the 

HEPA Filter and Debris Screen after each 

use as described in this section.

Fig.8

Filter 

Chamber

Dust 

Cup

4. Remove the HEPA  Filter from the filter 

chamber. (fig. 9)

5. Separate the debris screen from the 

HEPA filter cartridge by grasping the 

debris screen with one hand and the 

filter frame with the other and pull 

apart. (fig. 10)

Fig. 9

Filter 

Chamber

HEPA 

Filter

Debris 

Screen

Fig. 10

1. To remove the dust cup (container), 

hold the unit in the upright position 

to prevent the dust from falling out 

of the dust cup. (Fig. 6) 

Fig. 6

HEPA 

Filter

5

Reviews: