CUSTOMIZING THE
(PROGRAMMING)
Intellitherm C56
4
2
1
3
WILD CARD FUNCTION
1
2
3
P
S
P
H
USING
WITH THE STANDARD PROGRAMS
i.e. with the default schedules and temperatures already programmed at the factory
Intellitherm C56
1
8
22,30
8,30
22
17
13,30
11,30
6,30
20
17
5
°C
20
17
5
°C
AUTO 1
for weekdays
AUTO 2
for weekends and holidays
24
22
20
18
16
14
12
10
8
6
4
2
C
C
24
22
20
18
16
14
12
10
8
6
4
2
6
P
I
H
S
S
5
4
=ANTIFREEZE MODE
=ECONOMY MODE
=COMFORT MODE
24
22
20
18
16
14
12
10
8
6
4
2
C
C
24
22
20
18
16
14
12
10
8
6
4
2
THE
DISPLAY
Intellitherm C56
THE OTHER
PROGRAMS
Intellitherm C56
3
2
PROG
AUTO
24
22
20
18
16
14
12
10
8
6
4
2
C
C
24
22
20
18
16
14
12
10
8
6
4
2
P
At
all
times,
the
display
shows
the
room
temperature,
the
actual
time
of
day, whether
there
is
any
demand
for
heating
(or
for
conditioning
in
summer)
and
the
battery
low
signal
.
The
display
also
shows
a
programming
ring
that
represents
a
24-hour
clock,
divided
into
48
sectors,
each
corresponding
to
half
an
hour. Each
sector
is
further
divided
in
half
and
colored
red,
red-and-black,
or
black
(depending
on
the
program
selected).
The
color
of
the
sectors
indicates
the
type
of
temperature
programmed
for
that
particular
time
of
day, i.e.
-
red
=
comfort
temperature
-
half
red
and
half
black
=
economy
temperature
-
black
=
off.
After
installing
and
wiring
up
the
C56,
simply
follow
the
numbered
steps
specified
below.
Move
the
switch
S
to
one
of
the
two
STANDARD AUTOMATIC
PROGRAMS,
AUTO
1
or
AUTO
2
,
with
the
default
schedules
and
temperatures
already
programmed
at
the
factory.
Using
the
red
buttons,
adjust
the
COMFORT
mode
temperature. The display will
show the temperature setting
instead of the room
temperature.
Using the blue buttons, adjust
the
ECONOMY
mode
temperature. The display will
show the temperature setting
instead
of the
room
temperature.
Reset button. By holding this
down for a few seconds with the
tip of a tool, you can zero all
programming operations and
restore the standard program.
Make sure that the
switch
I
is low, on the
winter position Inserire
simbolo
SETTING THE ACTUAL TIME
This step can also be taken before
all the others.
Adjust the actual time
using the
Make sure that the
switch
P
is low, on the
AUTO
(automatic)
position
OFF -
this keeps the system constantly off or with the antifreeze protection option
enabled, depending on the choice made at the time of installation (see previous page).
ALWAYS ECONOMY -
this constantly maintains the economy mode temperature
selected by means of the blue buttons.
ALWAYS COMFORT -
this constantly maintains the comfort mode temperature
selected by means of the red buttons.
Programming the Intellitherm C56 is extremely straightforward. All you have to do is change the
color of the sectors on the ring that coincide with the schedules you require, i.e.
- red for the hours when you want the comfort mode temperature
- red and black for the hours when you want the economy mode temperature
- black for the hours when you want the system switched off.
To change the color of the sectors, simply follow the numbered steps below.
Place the switch P high, on
the
PROG (programming)
position.
The display will indicate
00.00
hours.
The flashing cursor on the
ring will automatically come
into position on the first sector
after the 24 hours.
Move the switch S to the program you want to change
(
AUTO 1
for weekdays or
AUTO 2
for weekends and
holidays)
Move the flashing cursor
(forwards or backwards)
around the ring with the
aid of the keys
The sector whose
color you want to
change will flash on the ring
and the corresponding time
will appear on the display.
Press the buttons to color the
sectors on the ring on the display.
Each time you press one of the three buttons, the
sector becomes colored and the cursor moves
forward by half an hour; use:
-
the
red
buttons for a
red
sector
-
the
blue
buttons for a half
red
and half
black
sector
-
the
black
buttons for a
black
sector.
To move the cursor without changing
the color of a sector, use the buttons.
After completing all the changes, bring the
switch
P
into the
AUTO
position.
With Intellitherm C56, you can temporarily cut out the
automatic program at any time, without losing it, in order to
obtain a given temperature (comfort, economy, off)
continuously for an interval ranging from
1 to 240
hours.
Put the switch
S
on the
AUTO 1
or
AUTO
2
position
Put the switch
P
on the
AUTO
position
Press the red (or blue or black) buttons to establish the
number of hours (shown on the display) during which
time you want to cut out the automatic program and
temporarily "force" the comfort (or economy or off)
mode. The ring on the display will turn the color
corresponding to the temperature you have selected.
After the interval established on the
Intellitherm
has
elapsed,
the
automatic
program will be restored.
To reduce the interval or abandon the wild card
option before it has run its course, press a
button corresponding to any color other than
the one on the ring shown on the display.
5
S
