Intellicomfort
21
CH193WIFI
Block? NO(YES)/PG06
Allows you to block the keyboard, with the 4-digit password. It only works
once and then must be re-enabled.
Pressing or switches from NO to YES, and press
ENTER
to request
the password, entered with the arrow keys or , selecting the digits
with and .
Press
ENTER
to store it, going back to the normal operating display,
where only the function key
ENTER
is visible. When you press it you
are requested to enter the password, using the arrow keys and
, followed by
ENTER
. The display goes back to normal programming,
enabling all the functions.
Press to go to page 7 and
ENTER
to exit.
Reset? NO (YES)/PG07
Press or to switch from NO to YES. Pressing
ENTER,
while “YES” is
displayed restores all the parameters (except date and time) to the default
values.
Press to go to page 8 and
ENTER
to exit.
CH193WIFI vX.Y/--/PG08
Displays the software version of the CH193WIFI chronothermostat.
Press to go to the next page and
ENTER
to exit.
EXT IN: ---/PG12
Allows you to modify management mode of the auxiliary input using keys
and to change:
---
: not active
Connecting a probe- EC18 - EC19 - EC20 allows you to set:
VIS
: visualisation of the temperature;
REG
: regulation of room temperature with the external probe;
UP
: use as maximum temperature threshold, to manage it you must:
press the key and set the desired maximum threshold using the
keys and .
This function deactivates the system when the temperature read by
the external probe is higher than the set temperature.
LOW
: use as minimum temperature threshold, to manage it you
must: press the key and set the desired minimum threshold using
the keys and .