45
GENERAL CONTENT AND CONSULTATION
IT
EN
DE
FR
Tire circumference compensation setting
When tires of another size are installed it is necessary
to reset the setting value.
Press and hold the selection button (“SELECT”) until
the specific value to be entered is reached. The correct
compensation value (expressed as a percentage) to be
entered can be calculated.
The calculation to define the value to insert is the following:
A ÷ B
•
100%
.
A. Circumference of the new tire.
B. Circumference of the original tire.
Setting values:
Scrambler version = 2202 mm;
Flat Track version = 2250 mm.
Check with the engine running idle if the RPM
indicator indicates a notch and if, with a slight
rotation of the gas, it indicates two. In this case,
the configuration adopted is correct, otherwise try
again.
In the event that the standard configuration values are not
successful, try the following combinations:
No. of pulses / waveform:
“1”/”Lo” , “1”/”Hi” , “2”/”Lo” , “2”/”Hi”.
After completing the settings, press one and hold the
selection button (“SELECT”) to display the next setting view.
