Fantech MUAS 1200 Installation Manual Download Page 12

12

fantech

Five (5) Year Warranty

This warranty supersedes all prior warranties

DURING ENTIRE WARRANTY PERIOD:

 

Fantech will repair or replace any part which has a factory defect in 
workmanship or material. Product may need to be returned to the 
Fantech factory, together with a copy of the bill of sale and identified 
with RMA number.

FOR FACTORY RETURN YOU MUST:

 

 •  Have a Return Materials Authorization (RMA) number. This may be 

obtained by calling Fantech either in the USA at 1.800.747.1762 or 
in CANADA at 1.800.565.3548. Please have bill of sale available.

 •  The RMA number must be clearly written on the outside of the car-

ton, or the carton will be refused.

 •  All parts and/or product will be repaired/replaced and shipped back to 

buyer; no credit will be issued.

OR

The Distributor may place an order for the warranty part and/or product 
and is invoiced. The Distributor will receive a credit equal to the invoice 
only after product is returned prepaid and verified to be defective.

FANTECH WARRANTY TERMS DO NOT PROVIDE FOR REPLACEMENT 
WITHOUT CHARGE PRIOR TO INSPECTION FOR A DEFECT.  
REPLACEMENTS ISSUED IN ADVANCE OF DEFECT INSPECTION ARE 
INVOICED, AND CREDIT IS PENDING INSPECTION OF RETURNED  
MATERIAL. DEFECTIVE MATERIAL RETURNED BY END USERS SHOULD 
NOT BE REPLACED BY THE DISTRIBUTOR WITHOUT CHARGE TO THE 

END USER, AS CREDIT TO DISTRIBUTOR’S ACCOUNT WILL BE 
PENDING INSPECTION AND VERIFICATION OF ACTUAL DEFECT BY 
FANTECH.

THE FOLLOWING WARRANTIES DO NOT APPLY:

 

   •  Damages from shipping, either concealed or visible. Claim must be 

filed with freight company.

 • Damages resulting from improper wiring or installation.
 •  Damages or failure caused by acts of God, or resulting from improper 

consumer procedures, such as: 
   

1. Improper maintenance 

   

2. Misuse, abuse, abnormal use, or accident, and 

   

3. Incorrect electrical voltage or current.

 •  Removal or any alteration made on the Fantech label control number 

or date of manufacture.

 •  Any other warranty, expressed, implied or written, and to any conse-

quential or incidental damages, loss or property, revenues, or profit, 
or costs of removal, installation or reinstallation, for any breach of 
warranty.

WARRANTY VALIDATION

 

 • The user must keep a copy of the bill of sale to verify purchase date.
 •  These warranties give you specific legal rights, and are subject to an 

applicable consumer protection legislation. You may have additional 
rights which vary from state to state.

This warranty does not apply to any Fantech product or part which has 
failed as a result of faulty installation or abuse, incorrect electrical con-
nections or alterations made by others, or use under abnormal operating 
conditions or misapplication of the product or parts. We will not approve 
for payment any repair not made by us or our authorized agent without 
prior written consent. The foregoing shall constitute our sole and exclu-
sive warranty and our sole exclusive liability, and is in lieu of any other 
warranties, whether written, oral, implied or statutory. There are no 
warranties which extend beyond the description on the page hereof. In no 
event, whether as a result of breach of contract, or warranty or alleged 

negligence, defect incorrect advice or other causes, shall Fantech be lia-
ble for special or consequential damages, including, but not limited to, 
loss of profits or revenue, loss of use of equipment or any other associ-
ated equipment, cost of capital, cost of substitute equipment, facilities 
or services, downtime costs, or claims of customers of purchase for 
such damages. Fantech neither assumes or authorizes any person to 
assume for it any other liability in connection with the sale of product(s) 
or part(s). Some jurisdictions do not allow the exclusion or limitation of 
incidental or consequential damages so the above limitations and exclu-
sions may not apply to you.

Limitation of Warranty and Liability

Warning

Fantech products are designed and manufactured to provide reliable per-
formance, but they are not guaranteed to be 100% free from defects. 
Even reliable products will experience occasional failures and this possi-
bility should be recognized by the user. If these products are used in a 

life support ventilation system where failure could result in loss or injury, 
the user should provide adequate backup ventilation, supplementary nat-
ural ventilation, failure alarm system, or acknowledge willingness to 
accept the risk of such loss or injury.

Warranty

Summary of Contents for MUAS 1200

















Reviews: