background image

4

FRD Installation Manual

This warranty does not apply to any FANTECH product or part which has failed as a result of faulty installation or abuse, incorrect
electrical connections or alterations made by others, or use under abnormal operating conditions or misapplication of the product
or parts. We will not approve for payment any repair not made by us or our authorized agent without prior written consent. The fore-
going shall constitute our sole and exclusive warranty and our sole exclusive liability, and is in lieu of any other warranties, whether
written, oral, implied or statutory. There are no warranties which extend beyond the description on the page hereof. In no event,
whether as a result of breach of contract, or warranty or alleged negligence, defect incorrect advice or other causes, shall FAN-
TECH be liable for special or consequential damages, including, but not limited to, loss of profits or revenue, loss of use of equip-
ment or any other associated equipment, cost of capital, cost of substitute equipment, facilities or services, downtime costs, or
claims of customers of purchase for such damages. FANTECH neither assumes or authorizes any person to assume for it any other
liability in connection with the sale of product(s) or part(s). Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages so the above limitations and exclusions may not apply to you.

FANTECH, INC. products are designed and manufactured to provide reliable performance, but they are not guaranteed to be 100%
free from defects. Even reliable products will experience occasional failures and this possibility should be recognized by the user.
If these products are used in a life support ventilation system where failure could result in loss or injury, the user should provide
adequate backup ventilation, supplementary natural ventilation, failure alarm system, or acknowledge willingness to accept the risk
of such loss or injury.

For factory return you must:

1) Have a return materials authorization (RMA) number. This number

may be obtained by calling FANTECH, INC. At 1-800-747-1762.
Please have bill of sale available.

2) The RMA number must be clearly displayed on the outside of the

carton, or delivery will be refused.

3) All product being returned must be shipped prepaid and be

accompanied with a copy of the bill of sale.

4) Product will be replaced/repaired and shipped back to buyer. No

credits will be issued.

During the First Thirty (30) Days:

FANTECH, INC will repair or replace any part which has a factory
defect in workmanship or material. Product may need to be returned
to the FANTECH factory, together with a copy of the bill of sale and
identified with RMA number.

During The First Three (3) Years 

FANTECH, INC. will replace any product which has a factory defect in
workmanship or material. Product must be returned to the FANTECH
factory, together with bill of sale, and identified with an RMA number.

Three (3) Year Warranty

The following warranties do not apply:

Damages from shipping, either concealed or visible. Claim must be
filed with the carrier.

Damages resulting from improper wiring or installation.

Damages caused by acts of nature, or resulting from improper con-
sumer procedures such as:

Improper maintenance,

Misuse, abuse, abnormal use, or accident, or

Incorrect electrical voltage or current.

Removal or alteration made on the FANTECH 
label control number or date of manufacture.

Any other warranty, expressed, written or implied, and to any conse-
quential or incidental damages, loss of property, revenues, or profit,
or costs of removal, installation or reinstallation, for any breach of
warranty.

Warranty validation:

The end user must keep a copy of the bill of sale to verify purchase
date.

This warranty supersedes all prior warranties

Limitation of Warranty and Liability

Warning

United States

1712 Northgate Blvd., 
Sarasota, FL.  34234
(T) 1.800.747.1762 
(F) 1.800.487.9915
(T) 1.941.309.6000
(F) 1.941.309.6099

www.fantech.net
[email protected]

Canada

50 Kanalflakt Way, 
Bouctouche, NB E4S 3M5
(T) 1.800.565.3548
(F) 1.800.747.8116
(T) 1.506.743.9500
(F) 1.506.743.9600

www.fantech.ca
[email protected]

Article #: 301007

Rev Date: 081704

Distributed by

Summary of Contents for FRD Series

Page 1: ... installation servicing or cleaning unit switch power off at service panel and lock the service disconnect ing means to prevent power from being switched on accidentally When the service disconnecting means cannot be locked securely fasten a prominent warning device such as tag to the service panel c Installation work and electrical wiring must be done by qualified person s in accordance with all ...

Page 2: ... is secure temporary fixture can be removed 6 Make duct connections Flexible connectors supplied by others are recommended 7 Make electrical connections according to the appropriate diagram on the next page Please follow all applicable codes when installing this unit 1 Determine the fan location and preferred mounting method 2 If needed install the included mounting bracket on fan Be sure to use a...

Page 3: ...ight FRD 12 6 5 6 7 11 12 13 15 11 1 18 FRD 16 8 7 8 9 15 16 17 19 15 1 23 FRD 16 8XL 7 8 9 15 16 17 19 15 1 29 FRD 20 10 9 10 11 19 20 21 20 18 1 41 FRD 24 14 13 14 15 23 24 25 28 20 62 Dimensions A B C D E F H G J Dimensional Data Wiring FRD 12 6 FRD 16 8 FRD 16 8XL FRD 20 10 FRD 24 14 Notes 1 All leads are color coded 2 Capacitor leads may be reversed Fan operation will not be affected All dime...

Page 4: ...ou must 1 Have a return materials authorization RMA number This number may be obtained by calling FANTECH INC At 1 800 747 1762 Please have bill of sale available 2 The RMA number must be clearly displayed on the outside of the carton or delivery will be refused 3 All product being returned must be shipped prepaid and be accompanied with a copy of the bill of sale 4 Product will be replaced repair...

Reviews: