Operation:
Connect the power adaptor to a wall outlet and the DC plug to DC IN (9) on the
device. Press the On/Off button (10) on the rear panel to switch the soundbar on.
AUX IN Mode:
Press the Source button (1) to select the input source. The red LED lights up if the
soundbar is in AUX IN mode. Connect one end of the AUX IN cable to the AUX IN
jack (7) on the device and the other end for instance to your MP3 player.
Bluetooth Mode:
Press the Source button (1) to select the input source. The blue LED flashes fast if
the soundbar is in pairing mode to connect to a Bluetooth device. You can connect
the soundbar to your PC, notebook, smartphone or tablet. Important: The end device
must feature at least Bluetooth standard 2.0. For pairing, open the Bluetooth settings
on your end device and search for available devices. You will find the soundbar
under “FANTEC audio”. Connect with the soundbar after finding (for instance with
your smartphone) “Fantec audio”. For some end devices you must enter a password;
enter “0000” (find more details about Bluetooth pairing in your device’s manual).
The LED on the soundbar flashes slow after the device is paired with the soundbar.
Press Play/Pause or Skip +/- (3, 4, 5) on the soundbar if your end device features
Bluetooth v.2.1. In this way you can control your music directly on the soundbar.
Important
: Only one device at a time can be paired via Bluetooth with your
soundbar. First disconnect the old end device before pairing a new end device with
the soundbar.
Volume Control:
Turn the volume control knob to increase or decrease the volume level. Press the
volume control knob once and turn it to adjust treble, press twice and turn to adjust
bass.
Earphones Jack:
You can connect earphones to the soundbar. Connect the 3.5mm audio cable to the
jack (9) on the rear of the soundbar.
