Trouble Shooting
STEP
7
1.
If the device (8 HDDs installed) is connected to the PC with eSATA cable and the SATA HDD icon does not come out in 8, please check if the eSATA
interface card supports Port Multiplier or update the eSATA driver version.
2.
If the transfer rate is not normal, please check if the jumper at the SATA HDD is set to 1.5 or 3.0Gbps.
If there is noise with the fan, unscrew and take out the fan cover, pull out the power cord, clean the fan and assemble it back.
3.
4.
If the noise is still present, change the fan with another fan of size 80x80x20mm 2 pins.
Black cable
Red cable
Positive
(electrode)
Negative
(electrode)
5.
To take the HDD out of the device, slightly press down the handle and pull it out.
