3 System
Setup
Press
to enter the system setup menu as follow:
3.1 Manual
Scan
Move the cursor to
and press OK to start MANUAL SCAN; you can
set the start frequency, end frequency and band width manually.
3.2 Auto
Scan
Move the cursor to
and press OK to start AUTO SCAN base on the
Country setting.
3.3 System
setting
Move the cursor to
and press OK to enter system setting menu, you
can set Area, Time Zone, OSD Language.
3.4 Display
setting
Move the cursor to
and press OK to enter Display Setting menu, you
can set LCD Brightness, Contrast, Hue and Aspect Ratio option.
3.5 Factory
Default
Move the cursor to
and press OK to load Factory Default setting.
3.6 Version
Move the cursor to
and press OK to show the Hardware and Software
version information.
EN 4
