23
FANTEC AluDOCK2X Docking Station
8) u
SIng
thE
dEvIcE
aS
a
dockIng
StatIon
1. Turn on your computer.
2. Connect the power adapter to wall outlet and to the docking station.
3. Connect the USB 3.0 cable to the docking station and the
other end to a USB 3.0/2.0 port on your computer.
4. Turn on the power switch on the back [HDD(s), Power and
USB LED will flash and stay ON]
5. If the drive inserted is a brand new drive, you will have to initialize
partition and format the drive for the first time. If the drive inserted
is an older drive with data, you should see an acknowledgement
from the computer that the drive is ready for use.
6. For instruction on initializing the new hard drive, please refer to the
formatting guide.
LED Status
USB
POWER
SLOT 1
SLOT2
25%
50%
75%
100%
STANDBY
Solid
red
Drive 1
installed
Blue
Blue
Flashing
blue
at access
Drive 2
installed
Blue
Blue
Flashing
blue
at access
Drive 1/2
installed
Blue
Blue
Flashing
blue
at access
Flashing
blue
at access
LED Status in Docking mode
