9
2.2 Setting programmable keypad
1.
Press the SET button in the TV area for 3 seconds until the red LED lights steadily.
Now you are in programming mode.
(If no key is pressed within 15 seconds, the programming mode ends
automatically.)
2.
Place the media player remote control about 3 cm in front of the IR receiver of
your TV remote control.
3.
Press the grey power button in the TV zone: the red LED will start flashing. Now
press the power button of your TV remote control: after the red LED has flashed
3 times, the programming is completed successfully. Now you can use the
remote control of the FANTEC 4KS6000 to switch your TV on and off.
4.
If you want to assign additional keys, repeat steps 1 to 3.
5.
Press the SET button to exit the programming mode.
3. Functions
The settings menu allows personalization and configuration of presets.
3.1 Settings menu
To select a setting option, proceed as follows:
Wählen Sie das Einstellungssymbol auf dem Home-Bildschirm:
Use the right / left navigation keys to select an option, and then press OK.
