Step 6
(H5)
(H4) (P6)
(P1)
(P5)
(P5)
(P6)
(P2)
Adjust to be 10mm gap from floor
to the bottom of support legs.
Slot the centre rail (P6) between the headboard (P1) and footboard (P2) and attach using
Adjust the 2 x support legs (P4) so the adjusters are sitting approximately 10mm off of the floor.
Step 5
You will need
4 x Washers
(H5)
4 x Medium Bolts
You will need
28 x End
Connectors
(P7)
14 x Centre
Connectors
(P8)
28 x Slats
(P9)
(P7)
(P7)
(P8)
1
Attach 2 x end connectors (P7), 2 x slats (P9) and 1 x centre connector (P8)
together as shown.
fantasticfurniture.com.au
Page 7
(P9)
(P9)
Allen Key
(H2)
(H4)
(H2)
(H8)
4 x Spring Washers
(H8)
With assistance, move the bed to its final position.
4 x bolts (H4), 4 x spring washers (H8) and 4 x washers (H5). Do not fully tighten the bolts until
Step 7.