You will need
Step 10
Page 9
fantasticfurniture.com.au
Phillips
H
ead
S
crewdriver
You will need
Step 9
Insert 5 x Cam Nuts (H4) into Left & Right Drawer Side (P9 & P10) and Sup
por
t Rail
(P13) as shown. Rotate the cam nuts so the arrows point towards the incoming cam
bolts. Attach Drawer Front (P8) to Left & Right Drawer Side (P9 & P10) and Support Rail
(P13) by tightening all cam nuts with the Phillips Head Screwdriver.
Ensure that the Drawer Base (P11) is slotted into the grooves of Drawer Front (P8).
Phillips
H
ead
S
crewdriver
H4
H4
H4
H4
H4
5 x Cam Nuts
(H4)
(P9)
(P9)
(P8)
(P11)
(P13)
(P10)
(P10)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P9) and 1 x DR Runner (H9)
to the bottom of Right Drawer Side (P10) with 4 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
H5
H5
H5
H8
H9
H5
4 x Small
Screws (H5)
1 x DR
Runner (H9)
1 x DL
Runner (H8)
