Step 5
Page 8
fantasticfurniture.com.au
You will need
Position the 2 x side panels (P3) onto bottom panel (P2), making sure the grooves
on side panels and bottom panel are on the same side.
Insert 4 x large cam nuts (H2) into side panels (P3).
Rotate the cam nuts so the arrows
point towards the incoming cam bolts
. Using a flat head screwdriver, turn clockwise to lock.
Flat Head
Screwdriver
4 x Large Cam
Nuts (H2)
(P2)
(P3)
H2
H2
H2
H2
(P2)
(P3)
(P3)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Step 6
Slide back panel (P4) into
the grooves of the side panels
and bottom panel (P3, P2).
(P4)
(P3)
(P2)
(P3)
