You will need
Step 3
You will need
Step 4
Page 7
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Phillips Head
Screwdriver
Phillips head
screwdriver
(P3)
H4
H4
H4
(P1)
(P1)
Make sure raw edge
is facing up.
H1
H1
H1
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Top/Bottom Panels (P1) to Right Side Panel (P3), then tighten the cam nuts.
H4
H1
H4
H4
H4
H1
H1
H1
(P3)
(P1)
(P1)
(P2)
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push Left Side Panel (P2) into place and tighten the cam nuts.
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
