You will need
Step 2
You will need
Step 3
(P2)
(P3)
H4
H4
(P3)
(P1)
(P1)
H3
H3
H3
H3
H3
H3
H3
H3
Attach 8 x Cam Bolts (H3) into Side Panels (P2, P3).
Attach 4 x Cam Nut Screws (H19) into Side Panels (P2, P3).
Make sure raw edge
is facing up.
1
35
35
1
H19
H19
H19
H19
H4
8 x Cam Bolts
(H3)
4 x Cam Nut
Screws (H19)
Phillips head
screwdriver
4 x Cam Nuts
(H4)
4 x Dowels
(H1)
Insert 4 x Dowels (H1) into 2 x Top/Bottom Panels (P1).
Insert 4 x Cam Nuts (H4) into the holes of 2 x Top/Bottom Panels (P1).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Top/Bottom Panels (P1) to Right Side Panel (P3), then tighten the
cam nuts.
H1
H1
H1
Page 7
fantasticfurniture.com.au
Phillips head
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
