(P3)
You will need
Step 4
You will need
Step 3
12 x Cam Nuts
(H4)
Phillips Head
Screwdriver
16 x Small
Screws (H5)
4 x Catches
(H13)
Insert 12 x Cam Nuts (H4) into Inner Top Panel (P7),
2 x Shelf Panels (P8), Shelf Panel (P16) and Rails
(P12&P13&P14) as shown and attach to Left Side Panel (P3)
by tightening each Cam Nut with the Phillips Head Screwdriver.
Note: Before securing panels - ensure all Cam Nuts are on the bottom of
each shelf panel except for the Inner Top Panel which should face upwards.
Attach 4 x Catches (H13) to each side of Rail (P14) and Rail (P13) with 16 x Small Screws (H5)
by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
(P14)
(P14)
(P13)
FLIP
H5
H5
H5
H5
H13
H13
H13
H13
(P8)
(P8)
(P13)
(P14)
(P12)
(P16)
(P7)
H4
H4
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
fantasticfurniture.com.au
fantasticfurniture.com.au
PAGE 6
