(P21)
(P17)
(P19)
(P20)
You will need
Step 15
4 x Cam Nuts
(H4)
H4
H4
Attach Drawer Back (P18) to Drawer Sides (P19, P20) with 4 x Screws (H17),
make sure that the groove lines up the whole way around the drawer.
Tighten with a Phillips Head Screwdriver.
Slide the Drawer Base (P21) into the grooves between drawer sides as shown.
Phillips Head
Screwdriver
Ensure laminated
side of panel is
facing inwards.
Step 16
Attach Drawer Sides (P19, P20) to Drawer Front (P17). Insert 4 x Cam Nuts (H4) into the holes
of Drawer Sides (P19, P20). Make sure the opening on cam nuts point towards the incoming
cam bolts. Tighten with a Phillips Head Screwdriver.
(P19)
(P20)
Phillips Head
Screwdriver
You will need
4 x Screws
(H17)
Step 17
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P18)
(P19)
(P20)
H17
fantasticfurniture.com.au
PAGE 12