You will need
Step 10
Press Shelf Panel (P12) against Right Side Panel (P3), then slide Shelf Panel
(P12) between Shelf Panel (P6) and Top Panel (P1) to form the unit as shown.
Attach Shelf Panel (P12) to Right Side Panel (P3) with 2 x Screws (H17).
Tighten with a Phillips Head Screwdriver.
Attach Top Panel (P1) to Left Side Panel (P2), Right Side Panel (P3), Shelf Panel
(P7) and Shelf Panel (P8) with 8 x Dowels (H1) and secure with 8 x Cam Nuts (H4).
Tighten with a Phillips Head Screwdriver.
You will need
Step 9
H1
H4
H1
H4
(P1)
(P3)
(P2)
(P7)
(P8)
Phillips Head
Screwdriver
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
Phillips Head
Screwdriver
2 x Screws
(H17)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P1)
H17
(P12)
(P3)
(P6)
(P12)
(P6)
(P3)
fantasticfurniture.com.au
PAGE 9
