Page 7
Step 2
Insert 4 x Cam Nuts (H5) into Side Panels (P6 & P7).
Rotate the Cam Nuts so the arrows point towards the incoming bolts.
Attach Side Panels (P6 & P7) to the Top Panel (P3), by tightening the
Cam Nuts (H5) with a Phillips Head Screwdriver.
Attach Bracket (H10) to the Top Panel (P3) with Bracket Screw (H11),
tightening with a Phillips Head Screwdriver.
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
