Step 5
Place metal plate over bolt on castor and screw into bed-base. But do not fully tighten, leave a small gap
of about 4mm for the bracket to slip under, with the help of a second person, slide the bed bracket
attached to the Support leg (P2) between the metal plate and the bed-base and tighten castor to
fix in position.
Step 6
There are two height positions on the headboard to choose. Attach with long bolts (H1) through both holes
on support legs (P2) at the height of your choice to complete assembly.
Page 7
If the hole on your bed-base does not align
with the bed bracket,there is a metal plate that
can be used to secure the bracket to the bed base
Bracket-Left (P3)
Bracket-Right (P4)
You will need:
(H1)
4 X LONG BOLTS
Holes for
lower position
Holes for
high position
(H1)
wider area over the bracket
