Step 1
PAGE 5
Step 2
6
x Cam
Bolt (H1)
Phillips head
screwdriver
You will need
Screw 6 x Cam Bolts (H1) into Top Panel (P1) as shown.
4
x Big Cam
Bolt (H1)
4
x Slide
(H18)
4 x Big Wood
Dowel (H4)
Phillips head
screwdriver
You will need
6
x Screw
(H7)
Mallet
Separate the Slide Runners (H18-2) and Slide Tracks (H18-1) from Slide (H18)
by following the steps below:
Extend the Slide Runner all the way forward.
Press the plastic release lever of the slide down and pull the Slide Runner
(H18-2) completely out.
Insert 2 x Big Wood Dowels (H4) into Left Side Panel (P3).
Screw 2 x Big Cam Bolts (H1) into Left Side Panel (P3).
Attach 1 x Slide Tracks (H18-1) onto Left Side Panel (P3)
with 3 x Screws (H7).
Insert 2 x Big Wood Dowels (H4) into Right Side Panel (P4).
Screw 2 x Big Cam Bolts (H1) into Right Side Panel (P4).
Attach 1 x Slide Tracks (H18-1) onto Right Side Panel (P4)
with 3 x Screws (H7).