Page 9
fantasticfurniture.com.au
Step 10
Step 9
You will need
Phill
i
ps
H
ead
Screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
3 x Cam Nuts
Raw side facing bottom
(H4)
(H4)
(H4)
(H4)
P12
P12
P9
P10
P13
P11
P9
P10
P13
Insert 3 x Cam Nuts
(H4)
into the Drawer Side Panels (P9 & P10) and Drawer Support Panel
(P13). Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach the Drawer Front Panel (P12) to the panels (P9, P10 & P13), by tightening Cam Nuts
with Phillips Head Screwdriver.
Slot in the Drawer Base Panel (P11) into the grooves of panels (P9, P10 & P11) as shown.
