www.fantasticfurniture.com.au
PAGE 7
Insert 4 x Small Dowels (H2) into Left Side Panel (P2) and Legs (P7, P9).
Insert 4 x Cam Nuts (H4) into the holes of Rails (P4, P5, P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Rails (P4, P5, P6) to the left frame, then tighten the cam nuts using a Flat head screwdriver.
Insert 4 x Small Dowels (H2) into Right Side Panel (P3) and Leg (P10).
Insert 4 x Cam Nuts (H4) into the holes of Rails (P4, P5, P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Push the right frame into place, then tighten the cam nuts using a Flat head screwdriver.
Hammer 4 x Plastic Glides (H2) on Legs (P7, P8, P9, P10) as shown.
4 x Cam Nuts
(H4)
Flat head
screwdriver
You will need
Step 6
4 x Cam Nuts
(H4)
You will need
Flat head
screwdriver
Step 7
4 x Plastic
Glides (H2)
Hammer
(P3)
(P10)
(P8)
(P2)
(P7)
(P9)
(P6)
(P4)
(P4)
(P5)
(P6)
(P4)
(P4)
(P5)
H4
Back Panel Slot
H4
H4
H4
H2
H2
H2
H2
H2
H2
H2
H4
H4
H4
H4
H2
H2
H2
H2
H2
4 x Small
Dowels (H2)
4 x Small
Dowels (H2)
