(P7)
(P6)
(P7)
fantasticfurniture.com.au
Page 10
Insert 2 x dowels (H1) into the side cover (P7). Attach 6 x cam bolts (H3) into 1 x side cover (P7),
tightening with a phillips head screwdriver.
Insert 6 x cam nuts (H4) into the holes on the side rail (P6). Rotate the cam nuts so the
arrows point towards the incoming cam bolts. Attach the side rail (P6) to the side cover (P7),
then tighten the cam nuts with a phillips head screwdriver. Repeat step 11 and step 12 for
the other side cover (P7) and side rail (P6).
You will need
Step 11
12 x Cam
Bolts (H3)
Phillips Head
Screwdriver
4 x Dowels
(H1)
x2
x2
H3
H3
H3
H3
H3
H3
H1
You will need
Step 12
12 x Cam
Nuts (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H4
H1
H4
H4
H4
H4
H4
