Step 5
You will need
Attach 4 x Cam Bolts (H7) to Top Panel (P1) by tightening with the Phillips Head
Screwdriver.
Phillips Head
Screwdriver
4 x Cam Bolts
(H7)
H8
H8
1 x Safety Strap
(H5)
fantasticfurniture.com.au
fantasticfurniture.com.au
Page 7
Step 6
You will need
Insert 4 x Cam Nuts (H8) into Side Panels
(P2x2) as shown. Rotate the cam nuts so
the arrow points towards the incoming cam
bolts. Attach 1 x Safety Strap (H5) between Top Panel (P1) and Rail (P4) as shown. Attach
Rails (P4x2) and Side Panels (P2x2) to Top Panel (P1) with 6 x Long Screws (H4) by tightening
with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Cam Nuts
(H8)
(P4)
(P2)
(P2)
(P4)
(P1)
6 x Long
Screws (H4)
H4
H4
H4
H5
(P1)
H7
H7
H7
H7
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
