You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Attach 3 x CL RunnerTracks (H6),
3 x CR Runner Tracks (H7) and 4 x
Cam Bolts (H3) to Divider Panel (P7) with
18 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
Attach 1 x Cam Bolt (H3) into
Bottom Rail (P6). Insert 1 x Dowel (H1)
into Top Rail (P4) and 1 x Cam Nut
(H4) into Divider (P7) as shown.
Rotate the cam nuts so the arrow
points towards the incoming cam bolts.
Attach Rails (P4 & P6) to Divider (P7) by
tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
1 x Dowels
(H1)
1 x Cam Nuts
(H4)
Phillips Head
Screwdriver
FLIP
Cam Nut hole
nearby bottom
(P7)
(P7)
(P7)
(P4)
(P6)
H7
CR
H5
fantasticfurniture.com.au
fantasticfurniture.com.au
Page 6
H6
CL
H5
H5
H5
H6
H6
H3
H3
H7
H7
H1
H3
H4
H7
H6
H5
H5
H5
H5
18 x Small
Screws (H5)
3 x CL Runner
Tracks (H6)
3 x CR Runner
Tracks (H7)
4 x Cam Bolts
(H3)
1 x Cam Bolts
(H3)
