Step 4
Page 10
fantasticfurniture.com.au
You will need
12 x Dome Screws
12mm (H7)
Insert 2 x cam nuts (H2) into bottom rail (P14) as shown.
Rotate the cam nuts so the arrows point towards the cam bolts.
Tightening the cam nuts with the phillips head screwdriver.
Secure bottom rail (P14) to kickboards (P11x2) as shown with 4 x dome screws (H7)
by tightening with the phillips head screwdriver.
Secure kickboards (P11x2) to bottom panel (P2) with 8 x dome screws (H7) by tightening
with the phillips head screwdriver.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
2 x Cam Nuts
(H2)
Phillips Head
Screwdriver
(P14)
(P11)
H7
H7
H7
H7
H7
H7
H7
H7
H7
H7
H7
H7
(P14)
(P2)
(P11)
(P11)
(P2)
H12
(P11)
H7
H2
H2