fantasticfurniture.com.au
Page 10
Step 7
You will need
4 xMagnetic Catch
(H5)
4x Plastic Sleeve
(H8)
Phillips Head
Screwdriver
Fasten magnetic catch (H5) to the Top Panel (P3) and Base (P1).
Insert 1x Plastic Sleeve (H8) each into the Top (P3) and Base (P1).
Place the Door (P11) with its hinge into the Plastic
Loosen the Door Hinge (H4) on the top of Door (P9)
Insert the top hinge into the Plastic Sleeve (H8) on
Slide the top corner of Door (P9) into the hinge.
Tighten the bolts on the door hinge with a Phillips
Repeat process for other door
Step 8
2x Wall Straps
(H11)
It is recommended that the unit is fixed to a wall.
As wall materials vary, screws for fixing to wall are not included
For advice on suitable screw systems, contact your local
specialized dealer.
Move the cabinet to the desired position against a wall.
Mark a line on the wall at 2 sides of top edge of the cabinet.
Remove the cabinet, mark a point about 10 mm below the line.
Attach the wall strap (H11) with the appropriate screw system
and 2x Metal Washers (H10).
(H4)
(H8)
(H5)
(H5)
(H8)
(H4)
Sleeve (H8) in Base (P1).
with a Phillips Head Screwdriver.
the Top Panel (P3).
Head Screwdriver ensuring contact with the hinge plate.
2x Metal
Washers (H10)
You will need
Phillips Head
Screwdriver
(H11)
(H10)
