Step 8
Page 12
fantasticfurniture.com.au
You will need
1 x Adaptor
(H9)
Peel Off Sticker
1
3
Insert cable through the strap
Tighten the strap
2
Tighten Up
Screws (Optional)
Connect Power Cable
to controller (H8).
Interface
for Motor cable
H9
H11
H8
H8
H12
H9
(P1)
3 x Cable Ties
(H12)
Phillips Head
Screwdriver
3 x Screws
(H11)
Connect the adapter (H9), cotroller (H8) and motor together as shown.
We have provided 3 x cable tie organisers with this desk if you would like to use them.
Peel off the backing sticker. Stick on the underside of the desk as shown.
We have provided 3 pre-drilled holes as suggested locations.
You can choose to fix the cable ties with 3 x screws (H11), tightening with a phillips
head screwdriver.
Insert cable through the strap, and tighten the strap.