12 x Small
Screws (H5)
(P3)
(P8)
(P7)
(P6)
You will need
Step 5
Secure 1 x Slide Track (H6-1) and 3 x CR Runner Tracks (H8) to Right Side Panel (P4) with 12 x
Small Screws (H5) by tightening with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Page 7
H1
H1
H1
H4
H4
H4
Step 6
You will need
Phillips Head
Screwdriver
3 x Cam Nuts
(H4)
3 x Dowels
(H1)
Insert 3 x Dowels (H1) into Left Side Panel (P3).
Insert 3 x Cam Nuts (H4) into Rails (P6, P7, P8).
Rotate the nuts so the arrows point towards
the incoming bolts. Attach Rails (P6, P7, P8) to Left
Side Panel (P3) by tightening all nuts with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
H8
H5
CR
(P4)
H3
H6-1
H8
H8
H8
H5
H5
H5
H5
H5
H5
H5
H5
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
1 x Slide Track
(H6-1)
Use the holes shown below on the
Slide Track (H6-1) to secure the screws.
3 x CR Runner
Tracks (H8)
H5
H5
H5
