3 x Small
Screws (H5)
3 x Small
Screws (H5)
8 x Cam Bolts
(H3)
1 x Slide
(H6)
(P2)
(P3)
You will need
Step 1
Step 2
You will need
Attach 8 x Cam Bolts (H3) to Left Side Panel (P2) as shown by tightening with the
Phillips Head Screwdriver. Attach 1 x Slide Track (H6-1) to Left Side Panel (P2) with
3 x Small Screws (H5) as shown by tightening with the Phillips Head Screwdriver.
Separate the slide runners (H6-2) and slide tracks (H6-1) from Slide (H6)
by following the steps below. Extend the slide runner all the way
forward. Press the plastic release lever of the slide down and pull
the slide runner (H6-2) completely out.
fantasticfurniture.com.au
Page 5
8 x Cam Bolts
(H3)
Phillips Head
Screwdriver
H3
H6
Slide Runner
(H6-2)
Slide Track
(H6-1)
Slide Track
(H6-1)
Slide Track
(H6-1)
H3
H3
H3
H6-1
H6-1
H3
H3
H3
H3
H3
H3
H3
H3
H5
H5
Phillips Head
Screwdriver
Attach 8 x Cam Bolts (H3) to Right Side Panel (P3) as shown by tightening with the
Phillips Head Screwdriver. Attach 1 x Slide Track (H6-1) to Right Side Panel (P3) with
3 x Small Screws (H5) by as shown tightening with the Phillips Head Screwdriver.
1 x Slide
(H6)
H5
H5
H5
H5
H5
H5
