Ensure the grooves in the Top
Panel (P1), Bottom Panel (P14) and
Shelf Panel (P4) are located at the
back of the unit.
Grooves for
back panels
fantasticfurniture.com.au
Page 6
Step 3
You will need
4 x Dowels
(H1)
Insert 4 x Dowels (H1) into Bottom Panel (P14).
Attach Rails (P6 x 2) to Bottom Panel (P14) as shown.
(P6)
(P14)
(P6)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Phillips Head
Screwdriver
8 x Cam Nuts
(H4)
8 x Dowels
(H1)
Insert 8 x Dowels (H1) into Left Side Panel (P2). Insert 8 x Cam Nuts (H4)
into Top Panel (P1), Shelf Panel (P4), Rails (P6 x 2) and Bottom Panel (P14). Rotate the nuts
so the arrows point towards the incoming bolts. Attach Top Panel (P1), Shelf Panel (P4),
Rails (P6 x 2) and Bottom Panel (P14) to Left Side Panel (P2) by tightening all nuts
with the Phillips Head Screwdriver.
H1
H1
H1
H1
H1
H1
H1
H4
H4
H4
(P1)
(P14)
(P2)
(P6)
(P6)
(P4)
