fantasticfurniture.com.au
Page 9
4
Repeat for every bed slat until finished.
You will need
2 x Screws
(H3)
Phillips Head
Screwdriver
(H2)
Allen Key
Felt Pad
(H6)
Step 7
(H2)
(H3)
(P10)
(P10)
(P6)
(H6)
Make sure small
screw is tightened.
Ensure the inner space is square.
Attach the felt pad (H6) to the centre of the centre rail (P6) as shown. Secure the timber cross
fully with the Phillips Head Screwdriver.
rail (P10) into place in the centre of the side rails (P5) using 2 x screws (H3), and tightening
You may now fully tighten all bolts on the headboard (P1), footboard (P2) and
side rails (P5).
