You will need
Step 3
Insert 4 x Dowels (H1) into Rails
(P7, P8 x 2). Insert
4 x Cam Nuts (H4) into Rails
(P6, P8 x 2) as shown. Rotate
the cam nuts so the arrow points
towards the incoming cam bolts.
Attach Right Side Panel (P4) to Rails
(P6, P7, P8 x 2) by tightening with the Phillips Head Screwdriver.
Insert 4 x Dowels (H1) into Left Side Panel (P3). Insert 4 x Cam Nuts (H4) into Rails (P6, P8 x 2)
as shown. Rotate the cam nuts so the arrow points towards the incoming cam bolts. Attach
Rails (P6, P7, P8 x 2) to Left Side Panel (P3) by tightening with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
You will need
Step 4
Phillips Head
Screwdriver
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
Page 6
fantasticfurniture.com.au
(P3)
(P6)
(P6)
(P8)
(P8)
(P8)
(P8)
(P7)
(P7)
(P4)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H1
H1
H1
H1
H1
H1
H4
H4
Countersink
face bottom
H4
H4
H4
H4
