Step 14
PAGE 11
Step 13
Slide the drawer base (P12) into the grooves of the left and right drawer sides (P9, P10) and
the drawer front (P8).
Insert 4 x cam nuts (H2) into the left and right drawer sides (P9, P10), rotate the cam nuts (H2) so
the arrow is pointing towards the incoming cam bolt (H1).
To secure the left and rightdrawer sides (P9, P10) to the drawer front (P8), use the phillips head
screwdriver to tighten the small cam nuts (H2).
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
4 x Cam Nuts
(H2)
Phillips head
screwdriver
You will need
