fantastic furniture COMO Single Bed, Assembly Instructions Manual

Page: 8 / 13

2 x Cam Nuts
(H4)
You will need:
Step 11
2 x Small
Dowels
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Page 8
Step 12
You will need:
H13
P4 MUST GO IN
CORRECT WAY WITH
HOLE CLOSE TO TOP
H13
2 x Screws
(H6)
Attach Rails (P4) to Clapboard (P6) with 2 x Screws (H6).
Then hammer 2 x Plastic Glides (H13) on the bottom of Clapboard (P6).
(P4)
(P4)
(P6)
WRONG
H6
H6
2 x Plastic
Glides
(H13)
(P6)
Insert 2 x Small Dowels (H2) into Side Rails (P3).
Insert 2 x Cam Nuts (H4) into the holes of Clapboard (P6).
Rotate the cam nuts so the arrow point towards the incoming cam bolts.
Push Side Rails (P3) into place and tighten the cam nuts.
(P3)
(P3)
H2
H4
10mm
RIGHT
10mm
MAKE SURE
TWO ENDS ALIGN