You will need
Step 6
You will need
Step 5
Insert 2 x Dowels (H2) into Side Rails (P3).
Insert 2 x Cam Nuts (H4) into the holes of Clapboard (P6).
Rotate the cam nuts so the arrow point towards the incoming cam bolts.
Push Side Rails (P3) into place and tighten the cam nuts.
Phillips head
screwdriver
2 x Plastic
Glides (H11)
Hammer
2 x Cam Nuts
(H4)
2 x Dowels
(H2)
Flat head
screwdriver
(P6)
(P3)
(P3)
H2
H2
H4
H4
P4 MUST GO IN
CORRECT WAY WITH
HOLE CLOSE TO TOP
Attach Rails (P4) to Clapboard (P6) with 2 x Long Screws (H13).
Then hammer 2 x Plastic Glides (H11) on the bottom of Clapboard (P6).
(P4)
(P4)
(P6)
WRONG
H13
H13
10mm
RIGHT
10mm
MAKE SURE
TWO ENDS ALIGN
H11
H11
2 x Long
Screws (H13)
Page 7
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Required
Two People
