Step 4
You will need
You will need
Step 5
(P2)
H4
(P6)
(P6)
(P7)
(P7)
H4
H4
(P2)
(P8)
(P5)
H4
H4
H4
Insert 1 x Cam Nut (H4) into each Rail (P7x2). Rotate the cam nuts so the arrows point towards
the incoming cam bolts. Attach Rails (P7x2) to the Left Side Panel (P2) by tightening the cam nuts
with the Phillips Head Screwdriver. Attach Rails (P6x2) to Left Side Panel (P2) as shown.
Insert 3 x Cam Nuts (H4) into
Shelf Panel (P5). Rotate the cam
nuts so the arrows point towards the
incoming cam bolts. Attach Shelf Panel
(P5) to Left Side Panel (P2) by tightening
the cam nuts with the Phillips Head Screwdriver.
Attach Rail (P8) to Left Side Panel (P2) as shown.
2 x Cam Nuts
(H4)
3 x Cam Nuts
(H4)
Phillips head
screwdriver
Phillips head
screwdriver
Page 6
fantasticfurniture.com.au
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
