You will need
Step 6
You will need
Step 7
Page 8
fantasticfurniture.com.au
(P3)
(P3)
(P4)
(P5)
(P5)
(P5)
(P6)
(P6)
H2
H4
H4
H2
H8
H8
H2
H4
H4
H2
H8
H2
H2
H4
H4
H2
H8
H8
H2
H4
H4
H2
H8
H8
H2
H4
H2
Required
Two People
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 10 x Small Dowels (H2) into the holes of Shelf Panels (P3, P4).
Insert 10 x Cam Nuts (H4) into the holes of Dividers (P5, P6).
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Push Dividers (P5, P6) into place and then tighten the Cam Nuts using a Phillips Head Screwdriver.
Seal the holes with 10 x Covers (H8) as shown.
10 x Cam Nuts
(H4)
10 x Covers
(H8)
10 x Small
Dowels (H2)
(P2)
(P3)
(P4)
(P3)
H2
H4
H4
H2
H2
H4
H4
6 x Cam Nuts
(H4)
6 x Small
Dowels (H2)
Insert 6 x Small Dowels (H2) into the holes of Shelf Panels (P3, P4).
Insert 6 x Cam Nuts (H4) into the holes of Shelf Panels (P3, P4).
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Push Side Panel (P2) into place and then tighten the Cam Nuts.
Phillips Head
Screwdriver
Phillips Head
Screwdriver
