www.fantasticfurniture.com.au
PAGE 7
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H1
1 x Dowel
(H1)
(P5)
You will need
5 x Small Cam
Nuts (H4)
Step 5
Flat head
screwdriver
Step 6
Phillips head
screwdriver
You will need
6 x Long
Screws (H2)
Step 7
(P6)
(P6)
(P6)
(P7)
(P7)
(P7)
(P8)
(P9)
H4
H2
H2
H2
H2
H4
H4
H4
H4
(P10)
H2
H2
Slide Drawer Base (P8) in through the grooves
on Drawer Sides (P6, P7).
Insert 1 x Dowel (H1) into
Drawer Front (P5) as shown.
Insert 5
x
Small Cam Nuts (H4) into the holes
of Drawer Sides (P6, P7) and Drawer Support (P10).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Align the holes together, secure Drawer Sides (P6, P7) and Drawer Support (P10) into place,
tighten the cam nuts using a Flat head screwdriver.
Attach Drawer Back (P9) to Drawer Sides (P6, P7)
and Drawer Support (P10) with 6 x Long Screws (H2),
make sure that the groove lines up the whole way around the drawer.
Tighten the screws using a Phillips head screwdriver.
