fantastic furniture BUSSY BUNK BED MK 2, Assembly Instructions Manual

Page: 12 / 38

www.fantasticfurniture.com.au
Step 11
-Attach Panels (P8),(P10) to Panel (P2).
-Insert 1 x Cam Nut (H2) into Panel (P10)
make sure the arrow is pointing to the hole.
-Turn the Cam Nut(H2) 90
◦
clockwise to tighten.
-Remark:Hold Panels (P8)&(P10) to avoid them from
falling to damage the parts or structure until the end of Step 13.
You will need:
Phillips head
screwdriver
Step 12
You will need:
Phillips head
screwdriver
- Attach Panel (P11) to Panel (P2).
- Insert 2 x Barrel Nuts (H4) into Panel (P11).
- Screw 2 x Large Bolts (H3) through Panel (P2) into Barrel Nuts (H4)
- Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
Hold Panel(P11) to avoid them from falling to damage the parts
or structure until the end of Step 13.
PAGE 12
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
2 x Large Bolts
Ø6 x 50 mm
(H3)
2 x Barrel Nuts
Ø9.5 x 11 mm
(H4)
Flat head
screwdriver
1 x Cam Nuts
Ø14.5 x 11.9 mm
(H2)
P2
P11
P11
P2
H3
H4
P2
P8
P10
P2
P8
P10
H2
H1