Page 7
fantasticfurniture.com.au
Step 4
You will need
Step 3
Phillps
H
ead
Screwdriver
P
1
P14
(H6)
(H17)
(H6)
(H6)
(H6)
(H6)
(H2)
(H6)
4 x Cam Bolts
(H2)
3
x Screws
( H17)
1 x Allen Key
(H2)
(H2)
Phill
i
ps
H
ead
Screwdriver
You will need
(H5)
3 x Cam Nuts
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
P3
P6
P6
(H5)
(H5)
Attach Steel Bar (P14) to the Top Panel (P1) with 3 x Screws (H2), by tightening with Allen Key
(H17).
Insert 4 x Cam Bolts (H6) into Top Panel (P1), by tightening with a Phillips Head Screwdriver.
P6
Insert 3 x Cam Nuts (H5) into 3 x Support Panels (P6) as shown. Rotate the Cam
Nuts so the arrows points towards the incoming bolts. Attach 3 x Support Panels
(P6) to Left Side Panel (P3) by tightening all cam nuts with the Phillips Head
Screwdriver.
