You will need:
PAGE 8
You will need:
3 x Large
Wood Screw
(H4)
x 3
1 x Cam
Nut
(H2)
Attach Front Suport Rail(P5) to Front Plinth(P6) by using 3 Large Wood Screws(H4)
and a Philip head screwdriver.
Attach Front Plinth(P6) and Front Suport Rail(P5) to Left Side(P2), insert Cam Nut (H2)
into Rail (P5), rotate the Cam Nuts so the arrow point towards the incoming cam bolt,
turn clockwise to lock.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Phillips head
screwdriver
Phillips head
screwdriver
Note the position
of bevelled edge
Step 8
Step 7
