Insert 12 x cam nuts (H2) into panels (P8), (P9), (P11) & (P12). Rotate the cam nuts so the
arrows point towards the incoming bolt.
Insert 12 x dowels (H3) into panels (P8), (P9), (P11) & (P2) by hand or gently using a soft
head mallet.
Screw 8 x cam bolts (H1) into panels (P13) using a phillips head screwdriver.
You will need
Page 6
fantasticfurniture.com.au
8 x Cam Bolts
(H1)
12 x Wood Dowels
(H3)
12 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Soft Headed
Mallet
x 4
pcs
x 4
pcs
x 4
pcs
H1
H3
16 x 38mm
Screws (H4)
You will need
Phillips Head
Screwdriver
4 x 22 Screws
(H6)
4 x Rhinestone
Handles (H7)
Repeat x 4
This is how a cam nut works........
The head of the cam bolt
goes into the open mouth of
the cam nut. You then turn
the cam nut so it tightens
over the bolt.
Lock
H1
H2
Unlock
Step 2
Step 3
P11
P12
P13
P8
P9
H3
H3
H3
H3
H3
H3
H2
H2
H2
H2
H2
H2
H1
P12
P11
P10
P10
P12
P11
P14
P13
H4
H4
H7
H6
Begin assembling the drawers:
To attach panels (P11 & P12) to panel (P10), insert 4 x 38mm screws (H4) and tighten with a phillips head
screwdriver.
Slide in the drawer bottom panel (P14) into the grooves of panels (P11, P12 & P10) with the laminated side
facing up.
Attach the panel (P13) to panel (P11 & P12) and ensure the drawer bottom panel (P14) slides into the groove on
panel (P13).
Turn the cam nuts on panels (P11 & P12) clockwise with a phillips head screwdriver to lock in
position.
Attach the handle (H7) to panel (P13) with 1 x 22mm screw (H6) using a phillips head screwdriver.
Repeat this process for the remaining drawers.
Laminated
Side
H2
H1
H2
Laminated
Side
