Step 5
You will need
Phillips Head
Screwdriver
H10
This is how a cam nut works........
The head of the cam bolt goes
into the open mouth of the cam
nut. You then turn the cam nut
so it tightens over the bolt.
P4
Attach the side rails (P2 & P3) to the foot board (P4).
Align the dowels (H3)
in the side panels with the holes on the foot board (P4).
Turn the cam nuts (H2) on the side panels (P2 & P3) clockwise with a phil
l
ips head
screwdriver to lock into position.
Then fix the side rails (P2 & P3) to the foot board (P4) with 4 x bolts (H10) using a phil
l
ips
head screwdriver.
H7
H7
H7
H7
Attach the metal cent
re
support (P6) to the head board (P1) and foot board
(P4) with 4 x small screws (H7) using an allen key.
Ensure all bolts are fully tightened.
P6
P7
4 x Small Screws
(H7)
Step 6
You will need
1 x Allen Key
(H1)
Page 7
fantasticfurniture.com.au
4 x Bolts
(H10)
