17
o
The Matrix meter in the D40/D40x/D60 is a 420 segment 3-D color
matrix.
o
Set ISO to desired sensitivity setting. Use ISO 200 for the least amount
of noise (digital grain), when possible.
Set personal preferences by using camera menus.
Using External Strobes:
Compatible strobes include any that can use the standard Nikonos five pin TTL sync. These strobes will
have to be used in the Manual Flash Exposure mode.
Nikon Speedlights, such as the SB-800, can be used with the D40/D40x/D60 in the original
iTTL Auto Flash Exposure mode with the FD-40X Housing.
Connect the strobe sync cord to housing's bulkhead sync port. On the side of the housing
port notice a simple alignment indicator [dot] The 5 pin cord contains a small channel
[groove] between two of the female pins of the cord. You must insert the cord into the port
so the groove is aligned with the indicator of the housing. This assures proper alignment.
Hold firmly in place while fastening locking screw. Tighten the collar to secure the cord in
place.
The O-ring on the end of the sync cord should be inspected, cleaned and lubricated in the
same way the port O-ring was treated.
Using different B and J arm systems can be accommodated by attaching to the 1" (25mm)
Aluminum ball on the top of the FD-40X's handles. Fantasea offers a full range of
Aluminum B and J arm sets and fittings.
