Fantasea EyeGrabber FP7000 Instruction Manual Download Page 4

 

EyeGrabber FP7000 Instruction Manual 20110523

 

 

 

 

c.

 

In order to remove the accessory lens from the 

EyeGrabber

, gently pull 

it off, starting from the secure line loop on the side of the niche, while 
pushing outward with your thumb (image #7).

 

d.

 

After the dive, detach the lens accessory from the 

EyeGrabber

 and rinse 

all components in fresh water. Dry with a soft clean cloth and store 
safely. 

 

 

 
Fantasea Product Consumer Limited Warranty: 
 

“Fantasea” warrants this Fantasea Line branded product against defects 
in materials and workmanship under reasonable use for a period of ONE 
(1) YEAR, (two years, where required by law as determined by the origin 
of the authorized dealer). This warranty is effective from the date of 
retail purchase from Fantasea or an authorized Fantasea dealer, by the 
original end-user purchaser (“Warranty Period”). This warranty does 
not cover any commercial use of the product. If a product defect arises 
and a valid claim is received within the Warranty Period, at its option, 
Fantasea, or its authorized service facilities will either (1) repair the 
product defect at no charge, (2) exchange the product with a product that is new or which has been 
manufactured from new or serviceable used parts and is at least functionally equivalent to the original 
product. The warranty will not extend beyond the original warranty period. Your Fantasea Product should be 
registered within 30 days of purchase. You must keep the proof of purchase which indicates the date on which 
the purchase was made; as you may be required to show proof of purchase if you need warranty service. The 
following conditions apply: 1. This warranty extends to the original purchaser only. It is not assignable or 
transferable. 2. The warranty does not cover damage resulting from misuse, abuse, negligence, or accidents. 
Proper maintenance of the Product is the responsibility of the owner. 3. The warranty does not cover damage 
directly or indirectly resulting from the use of unauthorized replacement parts or service performed by 
unauthorized facilities. 4. This warranty does not cover any damage to any other product used in conjunction 
with the Fantasea product, including cameras and lenses, and resulting from any defect in the product 
materials or workmanship. 5. The cost of sending the product back to Fantasea or its authorized service 
facilities is the responsibility of the customer. 6. The warranty does not cover any incidental damages resulting 
from any defects in the product. This expressly includes any travel reimbursements or any other costs 
associated with the purchaser’s optional use of the product. The conditions of this warranty are expressly in 
lieu of all other expressed warranties, including the payment of consequential or incidental damages for the 
breach of any warranty. Please register your product on line at this URL: 

http://www.fantasea.com/registration

.

 

 

www.fantasea.com/contact

For further information, please contact us at 

 

www.fantasea.com

or visit our website 

 

Image #7

 

Image #7

 

Summary of Contents for EyeGrabber FP7000

Page 1: ...ens Holder on a Flex or Ball Joint Arm a Please use the utmost care and do not use excessive force when assembling and disassembling the different accessories in order to not cause any damage to the products b It is advisable to mount the EyeGrabber on the arm prior to installing the arm on the housing tray or handle c Remove the screws from the T2 Connector so that the two parts of the T2 Connect...

Page 2: ...tance encountered might be due to improper alignment of the holes on the Flex arm or due to the resistance of the nylon support line found inside the Flex arm In such a case please repeat step 1c and make sure the support line doesn t get in your way f Hold the rear part of the T2 Connector on the other side of the arm so the narrow side of it is facing the arm and is aligned with the screws the f...

Page 3: ... be secured when mounted both on the housing lens port and the EyeGrabber i Mount the arm with the EyeGrabber installed on your housing tray or handle 2 Installing and Removing Lens Accessories from the EyeGrabber a Installing and removing lens accessories from the EyeGrabber during the dive is the same as when installing and removing them from the housing lens port Hold the lens accessory in fron...

Page 4: ... of purchase You must keep the proof of purchase which indicates the date on which the purchase was made as you may be required to show proof of purchase if you need warranty service The following conditions apply 1 This warranty extends to the original purchaser only It is not assignable or transferable 2 The warranty does not cover damage resulting from misuse abuse negligence or accidents Prope...

Reviews: