4
BigEye Lens G Series Instruction Manual 20110616
towards the lens, but slightly tilted outwards. This will also ensure softer light and shadows
in your image.
3.
Removing the BigEye Lens from the FP7000 Housing Lens Port
a.
In order to remove the lens from the housing lens port, start by detaching the bungee cords from
the housing and follow by removing the BigEye Lens from the lens port.
b.
When removing the BigEye Lens from the housing lens port, it can be conveniently stored by
mounting it on the
EyeGrabber Canon G Series
(Cat. No. 4054)
. This lens holder attaches to any
standard Flex or Ball & Joint arm and enables safely securing Canon G Series lens accessories during
the dive, making them easily available for future use. For further information, please visit our
website at
www.fantasea.com/FantaseaEyes
4.
Installing Color Correction Inserts inside the BigEye Lens
a.
Color correction inserts can be installed inside the BigEye Lens G Series for the purpose of producing
underwater wide angle vivid and colorful images or videos. A dedicated slot was designed in order to
allow for easy installation of red or pink color correction inserts, which restore the colors absorbed
by water.
b.
The following color correction inserts can be installed inside the BigEye Lens G Series:
i.
RedEye Insert included with the
RedEye Filter G Series
(Cat. No. 5201)
– for restoring the red
color absorbed by blue water with the WP-DC28 and WP-DC34 housings.
ii.
PinkEye Insert included with the
PinkEye Filter G Series
(Cat. No. 5303)
– for restoring the
pink color absorbed by green water with the WP-DC28 and WP-DC34 housings.
iii.
RedEye Insert included with the
RedEye Filter S90/S95
(Cat. No. 5305)
– for restoring the red
color absorbed by blue water with the WP-DC35 and WP-DC38 housings. Please refer to the
EyeDaptor S90/S95-G Series
(Cat. No. 4707)
instruction manual for special instructions.
iv.
PinkEye Insert included with the
PinkEye Filter S90/S95
(Cat. No. 5307)
– for restoring the
pink color absorbed by green water with the WP-DC35 and WP-DC38 housings. Please refer
to the
EyeDaptor S90/S95-G Series
(Cat. No. 4707)
instruction manual for special instructions.
c.
In order to install a color correction insert inside the BigEye Lens, first remove the BigEye Lens from
the housing lens port.
d.
Remove the color insert from the
RedEye/PinkEye Filter G Series by
following the instructions provided in
the corresponding instruction manual.
e.
Attach the secure line to the color
insert and housing, if you haven’t done
so by now. If making use of an arm in
the system, the secure line can be
secured to the arm rather than to the
housing.
f.
Hold the BigEye Lens so that the dome
is pointed downwards, the adaptor side
is facing up and the “TOP” marking is
pointed away from your body (image #3).
Image #3
